Rollout Deployment
Deployment configuration is the Manifest for the application, it defines the runtime behavior of the application. You can define application behavior by providing information in three sections:
Chart Version
Yaml file
Show application metrics
1. Chart version
Key | Descriptions |
---|---|
| Select the Chart Version using which you want to deploy the application. |
Devtron uses helm charts for the deployments. And we are having multiple chart versions based on features it is supporting with every chart version.
One can see multiple chart version options available in the drop-down. you can select any chart version as per your requirements. By default, the latest version of the helm chart is selected in the chart version option.
Every chart version has its own YAML file. Helm charts are used to provide specifications for your application. To make it easy to use, we have created templates for the YAML file and have added some variables inside the YAML. You can provide or change the values of these variables as per your requirement.
If you want to see Application Metrics (For example Status codes 2xx, 3xx, 5xx; throughput, and latency) for your application, then you need to select the latest chart version.
Application Metrics is not supported for Chart version older than 3.7 version.
2. Yaml file
Container Ports
This defines ports on which application services will be exposed to other services
Key | Description |
---|---|
| envoy port for the container. |
| envoy Timeout for the container,envoy supports a wide range of timeouts that may need to be configured depending on the deployment.By default the envoytimeout is 15s. |
| the duration of time that a connection is idle before the connection is terminated. |
| name of the port. |
| port for the container. |
| port of the corresponding kubernetes service. |
| Used for high performance protocols like grpc where timeout needs to be disabled. |
| Envoy container can accept HTTP2 requests. |
EnvVariables
EnvVariables
provide run-time information to containers and allow to customize how the application works and the behavior of the applications on the system.
Here we can pass the list of env variables , every record is an object which contain the name
of variable along with value
.
To set environment variables for the containers that run in the Pod.
Example of env variables
IMP
Docker image should have env variables, whatever we want to set.
But ConfigMap
and Secret
are the prefered way to inject env variables. So we can create this in App Configuration
Section
ConfigMap
It is a centralized storage, specific to k8s namespace where key-value pairs are stored in plain text.
![](https://docs.devtron.ai/~gitbook/image?url=https%3A%2F%2Fdevtron-public-asset.s3.us-east-2.amazonaws.com%2Fimages%2Fcreating-application%2Fconfig-maps%2Fconfigure-configmap.jpg&width=768&dpr=4&quality=100&sign=4d693130&sv=1)
Secret
It is a centralized storage, specific to k8s namespace where we can store the key-value pairs in plain text as well as in encrypted(Base64
) form.
IMP
All key-values of Secret
and CofigMap
will reflect to your application.
Liveness Probe
If this check fails, kubernetes restarts the pod. This should return error code in case of non-recoverable error.
Key | Description |
---|---|
| It define the path where the liveness needs to be checked. |
| It defines the time to wait before a given container is checked for liveliness. |
| It defines the time to check a given container for liveness. |
| It defines the number of successes required before a given container is said to fulfil the liveness probe. |
| It defines the time for checking timeout. |
| It defines the maximum number of failures that are acceptable before a given container is not considered as live. |
| The mentioned command is executed to perform the livenessProbe. If the command returns a non-zero value, it's equivalent to a failed probe. |
| Custom headers to set in the request. HTTP allows repeated headers,You can override the default headers by defining .httpHeaders for the probe. |
| Scheme to use for connecting to the host (HTTP or HTTPS). Defaults to HTTP. |
| The kubelet will attempt to open a socket to your container on the specified port. If it can establish a connection, the container is considered healthy. |
MaxUnavailable
The maximum number of pods that can be unavailable during the update process. The value of "MaxUnavailable: " can be an absolute number or percentage of the replicas count. The default value of "MaxUnavailable: " is 25%.
MaxSurge
The maximum number of pods that can be created over the desired number of pods. For "MaxSurge: " also, the value can be an absolute number or percentage of the replicas count. The default value of "MaxSurge: " is 25%.
Min Ready Seconds
This specifies the minimum number of seconds for which a newly created Pod should be ready without any of its containers crashing, for it to be considered available. This defaults to 0 (the Pod will be considered available as soon as it is ready).
Readiness Probe
If this check fails, kubernetes stops sending traffic to the application. This should return error code in case of errors which can be recovered from if traffic is stopped.
Key | Description |
---|---|
| It define the path where the readiness needs to be checked. |
| It defines the time to wait before a given container is checked for readiness. |
| It defines the time to check a given container for readiness. |
| It defines the number of successes required before a given container is said to fulfill the readiness probe. |
| It defines the time for checking timeout. |
| It defines the maximum number of failures that are acceptable before a given container is not considered as ready. |
| The mentioned command is executed to perform the readinessProbe. If the command returns a non-zero value, it's equivalent to a failed probe. |
| Custom headers to set in the request. HTTP allows repeated headers,You can override the default headers by defining .httpHeaders for the probe. |
| Scheme to use for connecting to the host (HTTP or HTTPS). Defaults to HTTP. |
| The kubelet will attempt to open a socket to your container on the specified port. If it can establish a connection, the container is considered healthy. |
Autoscaling
This is connected to HPA and controls scaling up and down in response to request load.
Key | Description |
---|---|
| Set true to enable autoscaling else set false. |
| Minimum number of replicas allowed for scaling. |
| Maximum number of replicas allowed for scaling. |
| The target CPU utilization that is expected for a container. |
| The target memory utilization that is expected for a container. |
| Used to give external metrics for autoscaling. |
Fullname Override
fullnameOverride
replaces the release fullname created by default by devtron, which is used to construct Kubernetes object names. By default, devtron uses {app-name}-{environment-name} as release fullname.
Image
Image is used to access images in kubernetes, pullpolicy is used to define the instances calling the image, here the image is pulled when the image is not present,it can also be set as "Always".
imagePullSecrets
imagePullSecrets
contains the docker credentials that are used for accessing a registry.
regcred is the secret that contains the docker credentials that are used for accessing a registry. Devtron will not create this secret automatically, you'll have to create this secret using dt-secrets helm chart in the App store or create one using kubectl. You can follow this documentation Pull an Image from a Private Registry https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/ .
Ingress
This allows public access to the url, please ensure you are using right nginx annotation for nginx class, its default value is nginx
Legacy deployment-template ingress format
Key | Description |
---|---|
| Enable or disable ingress |
| To configure some options depending on the Ingress controller |
| Host name |
| Path in an Ingress is required to have a corresponding path type. Supported path types are |
| Path name |
| It contains security details |
Ingress Internal
This allows private access to the url, please ensure you are using right nginx annotation for nginx class, its default value is nginx
Key | Description |
---|---|
| Enable or disable ingress |
| To configure some options depending on the Ingress controller |
| Host name |
| Path in an Ingress is required to have a corresponding path type. Supported path types are |
| Path name |
| Supported path types are |
| It contains security details |
Init Containers
Specialized containers that run before app containers in a Pod. Init containers can contain utilities or setup scripts not present in an app image. One can use base image inside initContainer by setting the reuseContainerImage flag to true
.
Pause For Seconds Before Switch Active
To wait for given period of time before switch active the container.
Resources
These define minimum and maximum RAM and CPU available to the application.
Resources are required to set CPU and memory usage.
Limits
Limits make sure a container never goes above a certain value. The container is only allowed to go up to the limit, and then it is restricted.
Requests
Requests are what the container is guaranteed to get.
Service
This defines annotations and the type of service, optionally can define name also.
Key | Description |
---|---|
| Select the type of service, default |
| Annotations are widely used to attach metadata and configs in Kubernetes. |
| Optional field to assign name to service |
| If service type is |
Note - If loadBalancerSourceRanges
is not set, Kubernetes allows traffic from 0.0.0.0/0 to the LoadBalancer / Node Security Group(s).
Volumes
It is required when some values need to be read from or written to an external disk.
Volume Mounts
It is used to provide mounts to the volume.
Affinity and anti-affinity
Spec is used to define the desire state of the given container.
Node Affinity allows you to constrain which nodes your pod is eligible to schedule on, based on labels of the node.
Inter-pod affinity allow you to constrain which nodes your pod is eligible to be scheduled based on labels on pods.
Key
Key part of the label for node selection, this should be same as that on node. Please confirm with devops team.
Values
Value part of the label for node selection, this should be same as that on node. Please confirm with devops team.
Tolerations
Taints are the opposite, they allow a node to repel a set of pods.
A given pod can access the given node and avoid the given taint only if the given pod satisfies a given taint.
Taints and tolerations are a mechanism which work together that allows you to ensure that pods are not placed on inappropriate nodes. Taints are added to nodes, while tolerations are defined in the pod specification. When you taint a node, it will repel all the pods except those that have a toleration for that taint. A node can have one or many taints associated with it.
Arguments
This is used to give arguments to command.
Command
It contains the commands to run inside the container.
Key | Description |
---|---|
| To enable or disable the command. |
| It contains the commands. |
| It is used to specify the working directory where commands will be executed. |
Containers
Containers section can be used to run side-car containers along with your main container within same pod. Containers running within same pod can share volumes and IP Address and can address each other @localhost.
Prometheus
It is a kubernetes monitoring tool and the name of the file to be monitored as monitoring in the given case.It describes the state of the prometheus.
rawYaml
Accepts an array of Kubernetes objects. You can specify any kubernetes yaml here and it will be applied when your app gets deployed.
Grace Period
Kubernetes waits for the specified time called the termination grace period before terminating the pods. By default, this is 30 seconds. If your pod usually takes longer than 30 seconds to shut down gracefully, make sure you increase the GracePeriod
.
A Graceful termination in practice means that your application needs to handle the SIGTERM message and begin shutting down when it receives it. This means saving all data that needs to be saved, closing down network connections, finishing any work that is left, and other similar tasks.
There are many reasons why Kubernetes might terminate a perfectly healthy container. If you update your deployment with a rolling update, Kubernetes slowly terminates old pods while spinning up new ones. If you drain a node, Kubernetes terminates all pods on that node. If a node runs out of resources, Kubernetes terminates pods to free those resources. It’s important that your application handle termination gracefully so that there is minimal impact on the end user and the time-to-recovery is as fast as possible.
Server
It is used for providing server configurations.
Deployment
It gives the details for deployment.
Key | Description |
---|---|
| It is the image tag |
| It is the URL of the image |
Service Monitor
It gives the set of targets to be monitored.
Db Migration Config
It is used to configure database migration.
Application Metrics
Application metrics can be enabled to see your application's metrics-CPUService Monito usage,Memory Usage,Status,Throughput and Latency.
Deployment Metrics
It gives the realtime metrics of the deployed applications
Key | Description |
---|---|
| It shows how often this app is deployed to production |
| It shows how often the respective pipeline fails. |
| It shows the average time taken to deliver a change to production. |
| It shows the average time taken to fix a failed pipeline. |
Addon features in Deployment Template Chart version 3.9.0
Service Account
A service account provides an identity for the processes that run in a Pod.
When you access the cluster, you are authenticated by the API server as a particular User Account. Processes in containers inside pod can also contact the API server. When you are authenticated as a particular Service Account.
When you create a pod, if you do not create a service account, it is automatically assigned the default service account in the namespace.
Pod Disruption Budget
You can create PodDisruptionBudget
for each application. A PDB limits the number of pods of a replicated application that are down simultaneously from voluntary disruptions. For example, an application would like to ensure the number of replicas running is never brought below the certain number.
You can specify maxUnavailable
and minAvailable
in a PodDisruptionBudget
.
With minAvailable
of 1, evictions are allowed as long as they leave behind 1 or more healthy pods of the total number of desired replicas.
With maxAvailable
of 1, evictions are allowed as long as at most 1 unhealthy replica among the total number of desired replicas.
Application metrics Envoy Configurations
Envoy is attached as a sidecar to the application container to collect metrics like 4XX, 5XX, Throughput and latency. You can now configure the envoy settings such as idleTimeout, resources etc.
Prometheus Rule
Alerting rules allow you to define alert conditions based on Prometheus expressions and to send notifications about firing alerts to an external service.
In this case, Prometheus will check that the alert continues to be active during each evaluation for 1 minute before firing the alert. Elements that are active, but not firing yet, are in the pending state.
Pod Labels
Labels are key/value pairs that are attached to pods. Labels are intended to be used to specify identifying attributes of objects that are meaningful and relevant to users, but do not directly imply semantics to the core system. Labels can be used to organize and to select subsets of objects.
Pod Annotations
Pod Annotations are widely used to attach metadata and configs in Kubernetes.
Custom Metrics in HPA
HPA, by default is configured to work with CPU and Memory metrics. These metrics are useful for internal cluster sizing, but you might want to configure wider set of metrics like service latency, I/O load etc. The custom metrics in HPA can help you to achieve this.
Wait For Seconds Before Scaling Down
Wait for given period of time before scaling down the container.
3. Show Application Metrics
If you want to see application metrics like different HTTP status codes metrics, application throughput, latency, response time. Enable the Application metrics from below the deployment template Save button. After enabling it, you should be able to see all metrics on App detail page. By default it remains disabled.
Once all the Deployment template configurations are done, click on Save
to save your deployment configuration. Now you are ready to create Workflow to do CI/CD.
Helm Chart Json Schema Table
Helm Chart json schema is used to validate the deployment template values.
Chart Version | Link |
---|---|
| |
| |
| |
|
Other Validations in Json Schema
The values of CPU and Memory in limits must be greater than or equal to in requests respectively. Similarly, In case of envoyproxy, the values of limits are greater than or equal to requests as mentioned below.
Addon features in Deployment Template Chart version 4.11.0
KEDA Autoscaling
KEDA is a Kubernetes-based Event Driven Autoscaler. With KEDA, you can drive the scaling of any container in Kubernetes based on the number of events needing to be processed. KEDA can be installed into any Kubernetes cluster and can work alongside standard Kubernetes components like the Horizontal Pod Autoscaler(HPA).
Example for autosccaling with KEDA using Prometheus metrics is given below:
Example for autosccaling with KEDA based on kafka is given below :
Security Context
A security context defines privilege and access control settings for a Pod or Container.
To add a security context for main container:
To add a security context on pod level:
Topology Spread Constraints
You can use topology spread constraints to control how Pods are spread across your cluster among failure-domains such as regions, zones, nodes, and other user-defined topology domains. This can help to achieve high availability as well as efficient resource utilization.
Last updated